TotalCem

Cements for Life

TotalCem

Self-etching and self-adhesive permanent resin cemen


Model: TotalCem
Brand: Itena
 
 

Indications
For cementation of:

crowns bridges posts
inlays & onlays
Self-adhesive on:

enamel dentine metal
ceramic porcelain zirconium composites


Advantages


All in one! Etching + Primer + Bonding + Cement
Exceptional bonding strength: on enamel: 20MPa on dentine: 15MPa
Dual curing (Light- or self-curing)Guaranteed curing in areas with limited light penetration
Optimized gel state for an easy removal of excess: simply cure for 3-4s
3 types of intra-oral tips: (fine, extra-fine and ultra-fine Colibri)
No post-operative sensitivity
Extremely thin film (10 μm)
Not soluble in the oral fluids
Perfect seal
Radiopaque 250% of Al
Fluoride release
Can be used on vital teeth
2 shades available: Universal A2 & Translucent
Long term shade stability
Can be kept at room temperature: no need to refridgerate!

Technical Data


Compressive strength: 180 MPa
Flexural strength: 170 MPa
Hardness (by Barcol): 80
Water sorption: 12 μg/mm3
Solubility: 7 μg/mm3
Adhesive bonding to un-etched tooth enamel: 20 MPa
Adhesive bonding to un-etched bovin dentine: 15 MPa
Adhesive bonding to Rexillium: 20 MPa
Film thickness: 10 μm
Radiopacity, % Aluminium: 250
1-week Cumulative
Fluoride release: 40 ng/cm2
Working time: 2 min
Setting time: 3.5 min
Compatible with Halogen light: Yes
Compatible with Plasma arc light: Yes
Compatible with LED: Yes

Hints and Tips

  • Before applying TotalCem, the dentine must be dry, but not too dry
  • For inlays and onlays, etching the enamel edges with phosphoric acid is recommended, in order to increase the bonding strength (while taking care of not spreading over onto the dentine)
  • How to clean the root canal before applying TotalCem, in order to have an optimum cementation: Remove all residues of gutta percha with a calibrated drill. Pass over it with an ultrasonic probe. Rinse well and dry without over-drying. Apply TotalCem with an extra-fine intra-oral tip
  • TotalCem has not been developed to adhere to enamel with no mechanical support (eg. dental brackets, veneers)
  • During the setting of a ceramic inlay or a zircon crown, the following procedure can be followed to improve cementation: Apply hydrofluoric acid for 1 to 3 minutes, rinse thoroughly, dry, then apply silane (DentoBond Porcelain Fix)
Pdf Icon
total cem pdf
  • Address

    Abi Najem Building Hazmieh -Sayad - Said Freiha Street Beirut, Lebanon

  • Hotline

    Tel: +961 5 452 555 Mob: +961 3 612530 Fax: +961 5 452 888

  • Email contact

    info.richdent@gmail.com

  • Facebook

    https://www.facebook.com/RichaDenta/